1. Saat memotong, kami menggunakan mesin berventilasi untuk memotong kertas, dan ketinggian kertas pemotong tidak boleh melebihi 125mm, dan sesuai dengan kebutuhan, gunakan bobot posisi mei untuk mengencangkannya. Mesin tabung kertas hanya dapat memotong kertas, tidak pernah memotong bahan lain. Saat bekerja, jangan meraih di bawah setrika dan bilah pengepres untuk mencegah luka. Gunakan pemotong kertas khusus, jangan menjangkau mandrel yang berputar untuk mencegah cedera.
2. When edging, we should always pay attention to the trousers being rolled into the paper loading shaft to prevent injury or damage to the machine
3. Saat menyesuaikan alat mesin, perhatikan roda kain abrasif untuk mencegah cedera
Kedua, mesin tabung kertas harus dipelihara di samping tindakan pencegahan yang relevan selama operasi.
1. The equipment must be the responsibility of a special person, and others are prohibited from moving
2. The person in charge should check whether there are workers, cards, measuring tools and other sundries placed in various parts of the machine at any time, and remove them in time if they are found;
3. Staff are not allowed to leave their jobs at will to ensure the safe and normal operation of the machine. If they need to leave, they must ask someone (the same type of staff) to take care of them;
4. Pastikan stabilitas tegangan kerja dan jangan biarkan klik padam
5. Regularly check all the internal parts, observe the consumption level, and replace all the parts with serious wear. Reassembly should be measured with a spirit level, and the unevenness of the pump should be adjusted, and the coaxiality of the coupling should be checked and adjusted.
